Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
- If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve.
- Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.
- The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 99%.
Flexible charge algorithm
Fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Internal temperature sensor and optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers.
Synchronized parallel charging with Bluetooth
Up to 10 units can be synchronized with Bluetooth.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts.
Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed (a.o. with a smartphone) to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display
Specifications
Battery voltage: | 12/24/48V Auto Select (36V: Manual) |
Rated charge current: | 100 A |
Nominal PV power, 12V: a,b | 1450 W |
Nominal PV power, 24V: a,b | 2900 W |
Nominal PV power, 36V: a,b | 4350 W |
Nominal PV power, 48V: a,b | 5800 W |
Maximum PV open circuit voltage: | 250 V absolute maximum coldest conditions 245 V start-up and operating maximum |
Max. PV short circuit current: c | 70 A (max 30 A per MC4) |
Max efficiency: | 99% |
Self-consumption: | Less than 35mA @ 12V / 20mA @ 48V |
Charge voltage ‘absorption’: | Default setting: 14,4V / 28,8V / 43,2V / 57,6V (adjustable) |
Charge voltage ‘float’: | Default setting: 13,8V / 27,6V / 41,4V / 55,2V (adjustable) |
Charge voltage ‘equalization’: | Default setting: 16,2V / 32,4V / 48,6V / 64,8V (adjustable) |
Charge algorithm: | multi-stage adaptive (eight preprogrammed algorithms) or user defined algrithm |
Temperature compensation: | -16mV/°C / -32mV/°C / -64mV/°C |
Operating temperature: | -30 to +60°C (full rated output up to 40°C) |
Humidity: | 95%, non-condensing |
Communication: | Bluetooth VE.Direct communication port |
Dimensions (height x width x depth): | 216 x 295 x 103 mm |
Weight: | 4.5 kg |
a) If more PV power is connected, the controller will limit input power.
b) PV voltage must exceed Vbat +5V for the controller to start. Thereafter minimum PV voltage is Vbat +1V.
c) A PV array with a higher sort circuit current may damage the controller.
Documents for Download
- SmartSolar MPPT 150/45 up to 150/100 & 250/60 up to 250/100 Manual
- BlueSolar and SmartSolar Charge Controller MPPT - Overview
- VictronConnect - MPPT Solar Charge Controllers
- Brochure Off-grid, backup & island systems
- Brochure EasyPlus
- Brochure Automotive
- Brochure Marine
- Brochure Self-consumption & Energy Storage